All posts in Product Design

Industrial Product Designs For New Inventions

By | February 18, 2012 | Product Design | No comments

Article by Wilde Miller

Product design typically refers to the process of an effective generation and evolution of ideas which leads to the invention of new advanced industrial products. Those who are engaged in product design conceptualize certain ideas and make them tangible by inventing new products through a systematic approach. Today, there are several digital tools that enable these industrial designers to communicate, conceptualize, and then evaluate concepts in a much more convenient and quicker way. Although product design and industrial design are often used interchangeably, it basically refers to the process which helps attribute an artistic form and function in any craft design when mass production of goods occur.

Steps Involved in Product Design:

* First analyze the problem at hand without considering the solutions. Writing down the problem is the best way to get down to designing a solution for it.

* Write down all the requirements needed for creating a product. These may include the retail price, the object size, features of the product in question (like whether it needs to be waterproof or whether it needs to have batteries to work, and so on). This list helps the industrial designers to generate new ideas for the products.

* Brainstorming session follows where the ideas are sketched out and elaborated upon. The drawings may not be perfect. These are only made to investigate the designs for any flaws. The industrial designers at this stage interact with their clients to discuss ideas and you may not sign a contract with them for such services rendered.

* When a good idea evolves, you need to discuss it in details with the product design team. The industrial designers usually create a three-dimensional design on computers which shows the design in details. At this stage, the idea is either accepted or rejected.

* Once the concept has been finalized, the industrial designers next create three-dimensional models of all component parts, elaborate on design problems, make drawings for assembly of each part, and locate suppliers for the purchased components.

* Finally, the product design is subjected to testing where the product may be sent to few clients for feedback or to a laboratory for professional testing. Ideally, those not a part of the process should be asked to test the product to render an unbiased opinion.

* In the end, the design once approved is sent for manufacturing in facilities determined by your industrial designers.

Industrial design is essentially a blend of applied art and sciences in which the usability of products, ergonomics of using them, and their aesthetics can be enhanced to boost sales. The industrial designers seek to create and execute solutions for marketing and brand-development purposes by working on the form and usability of certain products. When you design a new invention, it is an eureka moment in history because it is perhaps the most ingenious and rewarding ways to earn money. Designing inventions mean finding a niche or discovering a need – coming up with something to make human lives better and qualitatively superior. Product design companies are here for this reason to turn something like an abstract notion into a real item for use. This prototype next gets designed through industrial design processes to make it both durable and logical.

Visit http://www.cobaltniche.com to find out more about this product design group which is globally focuses for creative development of products in Asia, Europe, and North America. Their teams of industrial designers are thoroughly experienced and skilled with specializations that help them work on a wide range of projects.










Plastic Product Design

By | February 10, 2012 | Product Design | No comments

The development of plastic & its associated processing techniques has been a phenomenal episode in the history of materials science. The huge development that took place in the last 60 years and the use of plastics in product design & manufacture has spiraled at a rate unparalleled by conventional materials. With a wide range of properties available, plastics have become one of the most utilized materials in the world today.

It is also well accepted that plastic product design is very critical due to increasing significance of:

* Product liability claims
* Growing environmental concerns
* Increasing awareness about quality costs

Product liability can be the most detrimental factor. It can result in settlements & penalties in the order of thousands of pounds, particularly when failure has resulted in personal injury or death. In addition to litigation financial costs, it causes loss of product perception, brand credibility & manufacturer reputation.

It is imperative therefore, that plastic product design must be devised in an ergonomic and efficient manner to ensure that the product performs all desired functions effectively, is economic to manufacture, is profitable to sell, suits the needs of the customer and is safe and economical to operate.

Some of the common faults in plastic product design include:

1. Use of inappropriate equipment process
2. Shots, bubbles and sink marks in product
3. Post moulding shrinkage
4. Warping
5. Foreign body contamination
6. Voids or cosmetic dis colouration and splay marks
7. Poor material homogeneity, weld lines and spider lines
8. Self contamination
9. Residual stress
10. Molecular orientation
11. Excessive crystallization
12. Inadequate packing, scorching, jetting or flashing

However, before you hit the panic button, there is a simple solution to get rid of all these problems and ensure that your product really stands out amongst the reliable and valued brands in the market.

A product design company provides effective, specialized and practical product design service to give you the best solution while selecting the design of your plastic product. A product design consultancy is a specialist in its domain. It analyzes individual client needs while presenting them with innovative design concepts to meet their needs in a cost efficient manner. It collects all required information regarding client expectation and employ formalized techniques to turn them into concrete product concepts.

Detekt design is a reputed Plastic product design company that also specializes in designing I phone cases. We have experienced designers for plastic products and have helped many entrepreneurs through Design Prototyping UK, Product Industrial Design UK.

Product Design Company & International Product Design Consultancy: Dektekt design is a reputed Plastic product design company. DetektDesign provide Product Design Service, Prototyping UK. We are western owned product design consultancy that operates in the largest manufacturing region in the world.

The World Of The Product Designing

By | February 8, 2012 | Product Design | No comments

Article by Georgette Adanas

A lot of people gain cash by designing brand-new products. It is an actually innovative and effective strategy to generate cash.It is also definitely rewarding and people can certainly make massive profits with product designing. If you want to design a completely new product, at 1st you should find the wishes of the individuals.You must find a space and produce a niche. You can view the daily life of the people and find out their wants. Then you can definitely design a product to make something much easier or even better.People make inventions in this way.Typically a person requires to do something tough and then makes a decision to produce an invention to make it easier.In a short time the individuals almost all around the planet will know the invention and purchase it from the markets to make their life easier.A small invention can certainly make significant differences to the way we live.

Yet the inventors aren’t product designers. They don’t know how to design and make the invention more efficient and simple to use. Now,the mission of the product designers begins here.They help the inventor or the producer to make the product simple to use and efficient.They generate brand-new ideas and apply it on the product and thus they transform the ideas into the real products.They search about the materials that they can use on the product,think about the dimensions and style of the product and advise some alternative functions for the product.They get the results after plenty of technical and market researches and send all of these data to the owner of the idea. They reach a deal with the owner of the idea about all of these options.Then they start the 3d modelling of the product with the assistance of the latest technological devolopments. The three-dimensional model will assist the owner of the idea to see the final product in 3 dimensions. If the inventor verifies the three-dimensional model of the product,the mass production starts.Then the products take their place on the markets. The products reach to a big buyer range.Yet the mission is going on and the production designers make an extensive research about the buyer reactions all around the planet.The producer earn huge amounts of cash from the sales of the products. They sell the product with high costs since the people purchase the prime quality and successful products with high expenses.

Product designing is one of the vital sectors of current times. A great number of manufacturers get the help of the product designers in the world. There are numerous product designers in all countries. You’ll get better results if you work with knowledgeable product designers. If they’ve a large client range it will be the most effective.Make contact with their customers and have some concepts about their results.If you are satisfied with the knowledge that you’ve you can start to work with them.You are ready to make cash and to be a well-known brand throughout the planet.All individuals will recognize your brand very quickly and you will be proud of yourself and your product.

Georgette Adanas has been writing content articles on product design service since 2003.










Find More Product Design Articles

Product Design – Innovation turned into Cutting Edge Products

By | February 7, 2012 | Product Design | No comments

Article by Dsksupinfocom


Product design pertains to combining art, science and technology to come up with a tangible, socially useful product. The students at DSK International School of Design get a taste what is product design and how it is to create something new. Consequently they are designing bright careers ahead of them.


Nothing in this world gives you more pleasure than being able to see and experience your own creation; something which has emanated from within you, it is a part of you and your small grey cells have contributed to that. Product design is a part of such an amazing process. It is something which gives you a hard time, but once the endeavour is over and you can see your creation, it is sheer joy.


To describe in completely technical terms, product designing is an elaborate process, germinating from a thought, an idea. It is primarily a process of problem solving, followed by a string of activities till the product is ready and all set to be marketed and its vast expanse of application. Generally, anywhere an individual takes up a product design course, there are following stages which the students learn about -


Initial Stage – This stage involves the genesis of the design of the product and that is an idea. The idea can come up as a result of imagination, research or observation. In some cases the idea can come up in response to a need, for instance to get in tune with current market trends.


Mid Stage – At this juncture the process is taken a step further. The designing part is taken care of with the help of concept development, prototyping, form exploration, material, necessary technology and so on. Once that is done, the model is tested and then production begins, involving manufacturing and fabrication.


Final Stage – Ultimately, once the product is ready, arrangements are done to market and sell the product. It will entail a detailed marketing plan, which can either be client based , where the client will buy the design then manufacture and sell it on his own or it can be based on the needs of the users, wherein, the consumer can directly buy the product from the user.
When there is a new product which has to be conceived and designed, there are following factors involved in product design -
Identification of customer needs
Conceptualization
Design at Systemic Level
Detailed Design
Testing and Refinement
Production Ramp Up


Talking about the application of product design encompasses a range of products, from electronics to furniture to lighting, tools to toys and any other common item.


All this and a lot more, is taught in great detail at DSK International School of Design. The infrastructure, the software used to teach and the faculty is a proof enough of that. DSK ISD has fully equipped design studios, 2D and 3D labs, workshops and creative room where the students can enhance and work on their product designing skills.


Then there is workshop with painting cabin for full scale vehicles, HD Industrial Printing station (A0 format), a photography lab, making it surely one of the best in the business in India.
Just as the equipment is cutting edge and on par with any modern industrial design institute, so are the trainers at DSK International School of Design. They are known names in the field of industrial designing with loads of experience and talent behind them.
<



With such infrastructural backing and exceptionally capable personal training in product design, no wonder the students who have passed out from DSK International School of Design are going to go places in the design industry!


DSK Supinfocom is India’s first and one of its kind International Campus offering professional courses in the flourishing fields of Animation, Game Design & Industrial Design. DSK Supinfocom is a result of a joint venture between the DSK Group and Globally recognized French Institute – Chamber of Commerce and Industry of North De France, (CCINDF).

http://www.dsksic.com/industrial_design/index










Product Designers Guide: Basics For New Product Development

By | February 6, 2012 | Product Design | No comments

Article by John F. Beaty

Product designers are forced to adjust as the market and buyer needs have evolved nowadays. Hence, designers have to respond by improving their products that will meet the expectations and needs of consumers. Whatever your idea of a successful product development might be, you have to take careful consideration with each step that goes in the process for utmost results.

Begin with identifying who your target sector is and what are their reasons for buying the product. Next, you can look at the perks that the product will offer to them and make it worth their money. You can utilize this information to identify the essential features to incorporate when you design product. Market investigation is a must with new product development because it will act as your guide on where and how to start.

Once you have the information from the market research, you need to hold brainstorming meetings with the design group. You can start with the fundamental procedures for designing and developing new products. Yet a truly successful product is developed through a mixture of old-fashioned and progressive methods that guarantee better quality. It is thus a test for the design team to merge those methods and deliver a quality outcome. You may even have to dig deeper into the ideas on hand to you to decide what functions to have in the final product.

Nevertheless, a brainstorming session is not only designed to come up with ideas to design product. An idea is essential to determine the subsequent steps. You may take advantage of it as an chance to assess your idea more deeply. With better ideas, you can explore better product development possibilities in the future. All of these are part of the design team’s task before they can release a successful new product.

Contemporary designs of today are more equipped when it comes to this scenario as they have access to advanced tools. However, a product must be about providing a favorable experience on consumers and not be duped with the artistic value. A good way to start is to focus how you can provide that positive experience and impact on the target user. This also acts as the foundation for a positive consumer experience highlighted by the product design team, that is tied up with a firm’s branding strategy.

For this to happen, designers need to be aware of the tools needed for a product development task. On the other hand, effective utilization of both the external and internal materials must be one of their priorities. And yet, you should not disregard the ability to develop market differentiation and brand identity through the product itself.

Designers are advised not to be hasty when they design product. Evaluate all concepts presented at the table and select which ones are viable now and which ones can offer longevity. You must place top priority on highly marketable products that can offer practical solutions. Product designers no doubt have a lot to consider when launching new products into the market, that is if they wish to generate more profits from it.

John F. Beaty writes about the process of developing new products, thus make sure to look up his articles to find out much more in terms of the perks of employing expert product designers to stay competitive in the industry.










Product Designing Services In Miama And Florida

By | January 29, 2012 | Product Design | No comments

Article by Piyush Rastogi

Product designing is the reason for products attractiveness and durability. Product designing is conversion of an idea into an end product by identifying the characteristics and expectation of the targeted market. The designing should be done keeping the predictable advantages that a consumer might expect from the product. The product should be built maintaining the user friendliness and should be targeted towards a fixed market and designed and development should be done after researching any of the same products prevailing in the market.

Product designing defines the looks, quality and sustainability of the product’s development phase. It also creates various protocols for the developers reducing the margin of error and makes the product development quite easy and efficient. The developers not only develop the product keeping the designed prototype in their mind rather they even have to focus upon the resource and cost involvement in the product’s development. The product engineer’s work of manufacturing the product highly depends upon the product designing and development phase.

Earlier when designing was done with the help of hand drawings, developers have to work on the possible errors that may have not been corrected during the product design phase. But now with the evolvement of various new prototyping techniques the designers can make much more reliable designs and can also check their generated prototypes.

The development teams now need not to pay great attention towards the prototyping errors they can easily work upon the generated prototype because it has been initially tested by the designing team. It is rightly said to design and develop new products the organization should use high value and innovative techniques in order to achieve success.

The product design and development has undergone various technological changes. And the outcome of the latest change is 3D printing prototyping. With the help of the aforesaid technology we can now create the 3D Dummy of the product which will have the same look and feel as that of the original product. The Rapid Prototyping is the term that has given birth to the new era of prototyping that not aims at making the quality of the product better but also aims at making the product quite reasonable in context to its price.

With the invention of various different technologies the companies should also upgrade themselves in order to strive for success in the field of Product Design and Development. These technologies has not just led to better quality of product but has highly depreciated the cost of various product development phases.

WB Engineering </strong> Inc. provide various Prototyping and Product Design Services in Miami, Florida. There are many companies that offer engineering solutions, but continuing to provide excellent service is what keeps us motivated.










More Product Design Articles

Product Design Consultancy

By | January 25, 2012 | Product Design | No comments

Designing is the most crucial phase in a new product development to ensure that the product functions effectively and fully suits the needs of the customer with safety. At the same time, the product should be cost efficient and should be able to generate a good market share along with expected profits for the manufacturer.

In plastic product design, technology has provided many prototyping options such as Rapid prototyping, Rapid tooling, Rapid injection molding and conventional injection molding. A product design consultancy or product design company provides effective, specialized and practical product design service to give the best solution while selecting the make of a plastic product.

The designers at a product design consultancy conceptualize and evaluate ideas, making them tangible with a more systematic approach. Their role is to combine art, science and technology to create long lasting, durable and efficient products. This evolving role has already been facilitated by digital tools that allow designers to communicate, visualize and analyze ideas in the most precise way after considering all available options.

By utilizing the services of a good product design consultancy, you can be assured of:

* Reduced product cost
* Enhanced innovation
* Support for your product even after manufacturing process
* Good product quality
* Maximum returns for your business
* Complete flexibility and minimal risk

More than any other material, parts made with plastic must be designed for production. With a host of prototyping options, almost anybody can design a plastic part to some extent. However, to do it really well, a thorough technical knowledge of the different processes, along with regular design is inevitably required.

A product design consultancy is a specialist in its domain. It analyzes individual client needs while presenting them with innovative design concepts to meet their needs in a cost efficient manner. It collects all required information regarding client expectation and employ formalized techniques to turn them into concrete product concepts. Concepts are also supported on their software tools to get a strong feel for its reaction to a number of potential situations. Extreme value testing is conducted to ascertain which concepts are most tolerant to design, production, and user environment variables. The concept generation phase of the product design company also collects the information that makes detailed design and engineering easier, faster, and less risky.

If you are looking for a perfect solution to plastic product designs in UK, Detektdesign is the place for you! Our product design consultancy has experienced designers for plastic products and we have helped many entrepreneurs through Design Prototyping UK, Product Industrial Design UK.

Product Design Company & International Product Design Consultancy: Dektekt design is a reputed Plastic product design company. DetektDesign provide Product Design Service, Prototyping UK. We are western owned product design consultancy that operates in the largest manufacturing region in the world.

Product Design and Development

By | January 25, 2012 | Product Design | No comments

Article by Deepak

Engineering has rightly been said as “One of the Finest Art of Modern World.” The widespread use of this term has given us some highly innovative and trendy products. The products are the outcome of good innovational thoughts and their implementation. Very often the term Product Designing is misinterpreted. Designing a product does not mean just drawing the outlay of the product, instead it is defining the product’s structure with every possible Measurement.

You can’t really think of cooking a dish without knowing the exact quantity of ingredients that are to be added. Similarly with Product Development, it is quite necessary to know the exact design and measurement of the product. And the aforesaid requirement is fulfilled by Product Designers.

With changing times, Designing phase has also undergone a massive change. Earlier, the designers produced the prototype of the product by designing it through hand and giving the rough measurement to the developers. Product Developers have to work really hard on the generated prototype as their job was not confined to developing the product, rather debugging the prototype was also the part of their job. The accuracy level was not sufficient and product prototyping was quite costly affair as a result of which only big companies were able to afford this service.

Now the development in Information technology has the changed the world of product designers upside down. With the help of latest available prototyping software such as Autodesk, one can easily build the product’s prototype and can also test the generated prototype. As a result of which products are becoming more reliable and attractive. The developing teams are also at ease when it comes to performing their task as they are not involved in debugging the generated prototype.

This transition from Traditional Designing techniques to IT based technique has been quite successful as well as helpful. Now, even small companies can go for product designing as generating the prototype in no longer a costly affair.

As designing the proper prototype of the product is quite important for the development phase similarly, developing the product keeping all the major issues such as resources to be used, cost of production, target market etc. is quite for manufacturing process. The product manufacturing strictly follows the development process outcome.

Thus, for building a great product it is quite necessary to know the various phases involved in Product Design and Development . As having knowledge about anything helps you in some or the other way.

WB Engineering was established in fall 2007, since then has been growing year after year by increasing its capabilities and customer base. Our staff includes engineers with varying backgrounds, including Biomedical, Mechanical and Electrical Engineering. With in house capabilities for digital and rapid prototyping using the newest and most sought after technology.










What is product design?

By | January 25, 2012 | Product Design | No comments

Article by Georgette Adanas

We are sure you’ve come across the words Product Design or Industrial Design before.

But what is actually Product Design? Is it truly “design” in the classical sense? Or is it some thing totally different. Some thing that everyone speaks about but no one actually knows? What’s the primary difference between “normal” design and Product Design or Industrial Design?

Product Design and Industrial Design is every thing about goods. No surprises here. Yet product and industrial design is about mass-produced things. Items that are produced in thousands and numerous thousands. All these products need a different level of design as the design requires to translated into an engineering file which will be input into a machine, which in turn churns out your product.

Thus , what’s a good example of Product Design? Any mass produced item around you is a good example of product design. The cup staying beside your table is a result of product design. The personal computer , phone or iPad you are reading this article on is a result of Product Design. Your shaver is an example of Product Design and thus , are your earplugs, the coke can you just bought or the TV in your living room.

Industrial Design or Product Design differs to “normal” design. When a designer creates a design for himself or a customer the outcome is, and very likely will be, unique. But Product Design is created from the start to be mass-produced.

A Product Designer or Industrial Designer requires to be aware of production processes and have a great knowledge of manufacturing. He or she needs to know how to make a merchandise that not only looks good but could possibly be created as well.

That is why the approach to product and industrial design is different. You do not just take your pen and get started. You have to be methodical in your approach from the start. Otherwise you will end up with an amazing looking design sketch on paper, which is too difficult or too high priced to make in manufacturing.

At DETEKT we use our verified five-stage model to make sure your new improvements and products won’t end up as just an elegant idea, yet that they make it to the hands of the users.

Stage 1: Investigation:

And thus you wish to produce a cool looking coffee maker. But there is more to it. To whom do you wish to sell it to? American clients, European customers or Chinese customers? Do you focus on young Professionals or retired University Professors? What machines are actually on the market? How are they created? This (many more) thoughts require to be answered in the analysis part.

The research part is just like a market research study. Even so, we choose to call it “Design Research” as the focus is on the Product Design. Throughout this process we check same items on the market, how they are designed, which client group the design is aimed at, what supplies are used and how they’re made.

A thorough research study is required for any Product Design to recognize how the product will be positioned in the industry when it is launched.

Stage two: Concept Design:

Thus you accomplished your research. You know what very similar goods are on the market, how they’re designed, manufactured and what materials are being used. Now it’s time to get going with the design of your new product.

We let our designers take into consideration new revolutionary designs for your product. Depending on the outcomes and agreed route in Stage 1 we’ll design it trendy, traditional or unique to be positioned in which you want it in the market.

Our designer all have production experience. They’re aware what materials we’ll use during production and understand manufacturing processes. So they will not come up with a crazy idea that’s not to produce. Throughout the Concept Design Stage we continually are in contact with you to be sure we hit your requirements right on the spot.

Stage three: Engineering

This is a very important stage. During the engineering stage the concept design is transferred to a 3d CAD file. Files that an industrialmachine can read to produce your items. You must make sure you have experienced engineers involved during this stage. Only half a millimeter excessive or insufficient and your whole product might be a failure.

After this stage we will send to you a viewable three dimensional file to confirm. And thus you can play around with your product on your laptop or computer screen – it is virtually real. But just not quite.

Stage four: Prototyping

That is the enjoyment part. At least for you. It is the first time you will take your good in your own hands. We send the engineering files to our prototype crew. They’ll make a prototype which will feel and look like the end product. There could be some aspects of the product that cannot be imitated at the prototype stage and all these will be outlined in advance. The prototype stage is vital to see how your product will look and perform actually. 3 dimensional personal computer graphics might be nice to look at, yet you need to hold some thing real in your hand to appreciate it.

Stage five: Manufacturing Documents

If you are satisfied with the model we will create the necessary manufacturing documentation to outline each component with the information the factory needs to know. Documentation includes all drawings and files which are necessary for factory to produce your product.

If you want to manufacture your merchandise in China, DETEKT also supports with this. From Design to Engineering, Prototyping and using the right manufacturing supply chain for your needs -everything out of one hand.

Georgette Adanas has been writing content articles on new product design since 1999.










Find More Product Design Articles